================================================================================
                                样例使用说明
                             Sample Description
================================================================================
功能描述：
此样例演示了时钟切换，由LSI切换至HSE。

Function descriptions:
This sample demonstrates clock switching from LSI to HSE.
================================================================================
测试环境：
测试用板：PY32F033_STK
MDK版本： 5.28

Test environment:
Test board: PY32F033_STK
MDK Version: 5.28
================================================================================
使用步骤：
1. 编译下载程序到MCU，并运行；
2. 用示波器监测PA8引脚上的频率，MCU启动后一开始输出LSI时钟，频率是32.768KHz，按
下用户键后，输出HSE时钟（24MHz）。

Example execution steps:
1.Compile and download the program to the MCU and run it;
2. Monitor the frequency on pin PA8 using an oscilloscope. After the MCU 
starts up, it initially outputs the LSI clock with a frequency of 32.768KHz. 
Press the user button to switch to the HSE clock (24MHz).
================================================================================
注意事项：

Notes:
================================================================================